熱芯盒射芯機安全操作需注意：
Attention should be paid to the safe operation of the core box ejection machine.
1、必須穿戴好防護眼鏡等防護用品。
1, must wear protective glasses and other protective equipment.
2、檢查射芯機及通風裝置，確保正常完好。
2. Check the core ejection machine and ventilation device to ensure normal completion.
3、檢查芯盒、射砂板、射砂頭、射砂筒、閘門板等工裝設施，確保光潔完好，相互之間裝配要牢固可靠。
3, check the core box, sand shooting board, sand ejection head, sand barrel, gate plate and other installation facilities to ensure smooth and clean, the assembly between each other to be firm and reliable.
4、合閘通電加熱前，要開啟水冷射砂板水源，同時檢查加熱裝置及有關電氣設施，確保安全可靠。
4, before the switch is heated, the water source of water cooled sand board should be opened, and the heating device and the related electrical facilities are checked at the same time, so as to ensure the safety and reliability.
5、開車前，開啟通風裝置，同時放儲氣包內積水，然后打開氣源，空載試車，確信動作正常方可使用。
5, before driving, open the ventilator, and store the water in the gas bag at the same time, then open the air source, test the car empty, and make sure that the normal action can be used.
6、操作時，嚴禁手觸芯盒，以防燙傷，夾傷手指。
6, operation, no hand touch box, in order to prevent scald, clip the finger.
7、必須保證射砂筒有足夠的芯砂(一般不少于2/3射砂筒容積)方可射砂，嚴禁無砂空射。
7, it is necessary to ensure that the sand barrel has enough core sand (generally not less than 2/3 sand barrel volume) to shoot sand, and no sand free air is strictly prohibited.
8、射砂時，操作人應避開分盒面分盒，以防分盒面密封不良噴砂傷人。
8. When sand shooting, the operator should avoid the box section of the box in order to prevent the poor sealing of the box surface from injecting sand.
9、從芯盒中拿取砂芯及對射砂板扎通砂孔時，必須戴好手套，以防燙傷手。從芯盒取出的砂芯要堆放整齊，防止倒塌。
9, from the box to take on the sand core and sand shooting plate Zaton sand hole, must wear gloves to prevent hand scald. The sand core removed from the core box should be stacked in order to prevent the collapse.
10、工作完畢，要及時清理射砂筒，射砂頭和砂斗內殘砂，清理芯盒和射芯機的結砂，清理工作場地，確保工作場地整潔。
10, after the work is finished, clean up the sand blasting cartridge, the sand blasting head and sand residue in the sand bucket, clean up the core and the core machine's sand, clean up the work area, and ensure that the workplace is clean.
